network simple homework

Get perfect grades by consistently using www.assignmentgeeks.org. Place your order and get a quality paper today. Take advantage of our current 20% discount by using the coupon code GET20


Order a Similar Paper Order a Different Paper

1. What is the channel capacity if the bandwidth is 1000 Hz and there are 8 signal levels? (Use the Nyquist formula)

A. 5000 bps

B. 6000 bps

C. 7000 bps

D. 8000 bps

2. What is the oldest and still most common transmission media?

A. Twisted pair

B. Fiber Cables

C. Coaxial Cables

D. Power Lines

3. A _________________ consists of a stiff copper wire as the core, surrounded by an insulating material. The insulator is encased by a cylindrical conductor, often as a closely woven braided mesh.

A. Twisted pair

B. Fiber Cable

C. Coaxial Cable

D. Power Line

4.______________________ uses a code sequence to spread the data signal over a wider frequency band. It is widely used commercially as a spectrally efficient way to let multiple signals share the same frequency band.

A. Direct Squence Spread Spectrum

B. Code Division Multiple Access

C. Ultra Wide Band

D. Frequency Division Multiplexing

5._______________ forms the basis of 3G mobile phone networks and is also used in GPS (Global Positioning System). Even without different codes, direct sequence spread spectrum, like frequency hopping spread spectrum, can tolerate narrowband interference and multipath fading because only a fraction of the desired signal is lost.”

A. Direct Squence Spread Spectrum

B. Code Division Multiple Access

C. Ultra Wide Band

D. Frequency Division Multiplexing

6.___________ sends a series of rapid pulses, varying their positions to communicate information. The rapid transitions lead to a signal that is spread thinly over a very wide frequency band.

A. Direct Squence Spread Spectrum

B. Code Division Multiple Access

C. Ultra Wide Band

D. Frequency Division Multiplexing

7. The most straightforward form of digital modulation is to use a positive voltage to represent a 1 and a negative voltage to represent a 0. For an optical fiber, the presence of light might represent a 1 and the absence of light might represent a 0. What is this modulation called?

A. Bits

B. Bipolar

C. Manchester

D. Non-Return to Zero

8. If there ware no noise, how many signal levels would be needed to achieve the channel capacity of 8 Mbps? (Use the Nyquist formular)”

9.If there ware no noise, how many signal levels would be needed to achieve the channel capacity of 8 Mbps? (Use the Nyquist formular)”

10.What method is used to transmit and receive independent signals in a fixe time slot?

Writerbay.net

Do you need help with this or a different assignment? We offer CONFIDENTIAL, ORIGINAL (Turnitin/LopesWrite/SafeAssign checks), and PRIVATE services using latest (within 5 years) peer-reviewed articles. Kindly click on ORDER NOW to receive an A++ paper from our masters- and PhD writers.

Get a 15% discount on your order using the following coupon code SAVE15


Order a Similar Paper Order a Different Paper